PERENCANAAN UALANG STRUKTUR BAJA PADA PEMBANGUNAN GEDUNG PERTANAHAN NASIONAL PROVINSI KALIMANTAN SELATAN BERDASARKAN SNI 1729-2020

Mentari, Imam (2022) PERENCANAAN UALANG STRUKTUR BAJA PADA PEMBANGUNAN GEDUNG PERTANAHAN NASIONAL PROVINSI KALIMANTAN SELATAN BERDASARKAN SNI 1729-2020. Diploma thesis, Universitas Islam Kalimantan MAB.

[img] Text
Artikel Ilmiah - Imam Mentari - 17640134.pdf

Download (531kB)

Abstract

Gedung Badan Pertanahan Nasional Provinsi Kalimantan Selatan merupakan gedung yang menggunakan struktur beton bertulang berdasarkan SNI 2847-2013 dalam strukturnya, namun bisa juga di rencanakan ulang menggunakan struktur baja berdasarkan SNI 1729-2020 Dalam. Dalam menganalisis struktur menggunakan tiga macam kombinasi pembebanan dimana beban yang bekerja pada struktur terbagi menjadi beban mati, beban hidup, dan beban gempa. Preliminary design balok (B1) menggunakan profil WF 400.200.12.19 dengan bentang 6 m dan untuk kolomnya (K1) menggunakan profil WF 400.400.13.21 dengan bentang 4,5 m. Hasil perhitungan analisis struktur menggunakan metode elemen hingga didapat nilai momen tertinggi untuk balok sebesar 139,15 kN.m, sedangkan untuk kolom didapat nilai gaya aksial sebesar 589,11 kN. Berdasarkan hasil analisis struktur nilai momen tertinggi maka untuk balok digunakan profil WF 350.175.7.11, sedangkan untuk kolom menggunkan profil WF 200.200.8.12. The National Land Agency Building of South Kalimantan Province is a building that uses a reinforced concrete structure based on SNI 2847-2013 in its structure, but can also be re-planned using a steel structure based on SNI 1729-2020 Dalam. In analyzing the structure using three kinds of loading combinations where the load acting on the structure is divided into dead load, live load, and earthquake load. The preliminary design of the beam (B1) uses a WF 400.200.12.19 profile with a span of 6 m and for the columns (K1) it uses a WF 400.400.13.21 profile with a span of 4.5 m. The results of the calculation of structural analysis using the finite element method obtained the highest moment value for the beam of 139.15 kN.m, while for the column the axial force value of 589.11 kN was obtained. Based on the results of the structural analysis of the highest moment value, the WF 350.175.7.11 profile for beams is used, while for columns the WF 200.200.8.12 profile is used.

Item Type: Thesis (Diploma)
Uncontrolled Keywords: Profil Balok, Profil Kolom, Desain Ulang, Kombinasi Pembebanan, Struktur Baja Beam Profile, Column Profile, Redesign, Load Combination, Steel Structure
Subjects: T Technology > TA Engineering (General). Civil engineering (General)
Depositing User: Imam Mentari
Date Deposited: 13 Apr 2022 02:22
Last Modified: 13 Apr 2022 02:22
URI: http://eprints.uniska-bjm.ac.id/id/eprint/10508

Actions (login required)

View Item View Item