PEMANFAATAN LIMBAH PLASTIK HDPE DAN PET DIJADIKAN SEBAGAI PAVING BLOCK DENGAN MENGGUNAKAN MESIN PELEBUR PLASTIK

Prabowo, Viky Priadi Eko (2022) PEMANFAATAN LIMBAH PLASTIK HDPE DAN PET DIJADIKAN SEBAGAI PAVING BLOCK DENGAN MENGGUNAKAN MESIN PELEBUR PLASTIK. Diploma thesis, Universitas Islam Kalimantan MAB.

[img] Text
ARTIKEL Viky Priadi Eko Prabowo 1.pdf

Download (620kB)

Abstract

Sampah plastik dapat bertahan hingga bertahun-tahun sehingga dapat menyebabkan pencemaran terhadap lingkungan. Maka dengan itu sampah cocok digunakan sebagai bahan pembuat paving block maka diperlukan Mesin Pelebur Plastik ini untuk mempermudah proses peleburan. Proses peleburan menggunakan tipe plastik PET dan HDPE. Penelitian ini bertujuan untuk mengetahui waktu yang dibutuhkan untuk proses peleburan plastik, mengetahui berapa temperatur normal dalam proses peleburan plastik, dan untuk mengetahui pengaruh perbedaan jenis plastik terhadap proses peleburan plastik. Hasil penelitian pengujian dengan menggunakan tipe plastik PET dengan jumlah plastik 1 kg = 30 menit, 1,5 kg = 45 menit, 2 kg = 60 menit, 2,5 kg = 75 menit, dan 3 kg = 80 menit dengan rata-rata waktu peleburan 58 menit, dan tipe plastik HDPE dengan jumlah plastik 1 kg = 50 menit, 1,5 kg = 78 menit, 2 kg = 92 menit, 2,5 kg = 110 menit, 3 kg = 130 menit, pengaruh temperatur terhadap kedua tipe plastik adalah tipe plastik PET dengan jumlah plastik 1 kg = 1700C, 1,5 kg = 1850C, 2 kg = 1970C, 2,5 kg = 2000C, dan 3 kg = 2000C jadi rata-rata temperatur proses peleburan 190,40C, dan tipe plastik HDPE dengan jumlah plastik 1 kg = 2000C, 1,5 kg = 2000C, 2 kg = 2200C, 2,5 kg = 2270C, 3 kg = 2400C jadi rata-rata temperatur proses peleburan 217,40C. Dan pengaruh perbedaan pada plastik tipe PET dengan jumlah plastik 1 kg =1879,87 joule , 1,5 kg = 3354,92 joule, 2 kg = 5096,81 joule, 2,5 kg = 6575,45 joule, dan 3 kg = 7013,82 joule dengan rata-rata 4784,17 joule, dan tipe plastik HDPE dengan jumlah plastik 1 kg = 4383,63 joule, 1,5 kg = 6838,47 joule, 2 kg = 9863,84 joule, 2,5 kg = 12160,69 joule, 3 kg = 16807,39 joule dengan rata-rata 10100,80 joule. Plastic waste can last for years so it can cause pollution to the environment. Therefore, garbage is suitable for use as paving block making material, this Plastic Smelting Machine is needed to facilitate the smelting process. The smelting process uses PET and HDPE plastic types. This research aims to find out the time it takes for the plastic smelting process, to know what the normal temperature is in the plastic smelting process, and to find out how different types of plastic are affected by the plastic smelting process. The results of the test study using pet plastic type with the amount of plastic 1 kg = 30 minutes, 1.5 kg = 45 minutes, 2 kg = 60 minutes, 2.5 kg = 75 minutes, and 3 kg = 80 minutes with an average melting time of 58 minutes, and hdpe plastic type with plastic amount 1 kg = 50 minutes, 1.5 kg = 78 minutes, 2 kg = 92 minutes, 2.5 kg = 110 minutes , 3 kg = 130 minutes. , temperature influence on both types of plastic is PET plastic type with plastic amount 1 kg = 1700C, 1.5 kg = 1850C, 2 kg = 1970C, 2.5 kg = 2000C, and 3 kg = 2000C so the average melting process temperature is 190.40C, and HDPE plastic type with plastic amount 1 kg = 2000C, 1.5 kg = 2000C, 2 kg = 2200C, 2.5 kg = 2270C, 3 kg = 2400C so average melting process temperature 217.40C. And the effect of difference on PET type plastic with the amount of plastic 1 kg = 1879.87 joules , 1.5 kg = 3354.92 joules, 2 kg = 5096.81 joules, 2.5 kg = 6575.45 joules, and 3 kg = 7013.82 joules with an average of 4784.17 joules, and HDPE plastic type with plastic amount of 1 kg = 4383.63 joules, 1.5 kg = 6838.47 joules, 2 kg = 9863.84 joules, 2.5 kg = 12160.69 joules, 3 kg = 16807.39 joules with an average of 10100.80 joules.

Item Type: Thesis (Diploma)
Uncontrolled Keywords: Sampah Plastik, Mesin Pelebur Plastik, Tipe Plastik Plastic Waste, Plastic Smelting Machine, Plastic Type
Subjects: T Technology > T Technology (General)
Depositing User: Viky Priadi Eko Prabowo
Date Deposited: 27 Apr 2022 04:27
Last Modified: 27 Apr 2022 04:27
URI: http://eprints.uniska-bjm.ac.id/id/eprint/10597

Actions (login required)

View Item View Item