PERANCANGAN ALAT PENDETEKSI UNTUK PENCEGAHAN DINI TERJADINYA KORONA PADA KUBIKEL 20 KV UNTUK MENINGKATKAN KEANDALAN BERBASIS IOT DI PLN UP3 BANJARMASIN

Yulian, Ade (2022) PERANCANGAN ALAT PENDETEKSI UNTUK PENCEGAHAN DINI TERJADINYA KORONA PADA KUBIKEL 20 KV UNTUK MENINGKATKAN KEANDALAN BERBASIS IOT DI PLN UP3 BANJARMASIN. Diploma thesis, Universitas Islam Kalimantan MAB.

[img] Text
Artikel Jurnal Ade Yulian (final).pdf

Download (508kB)

Abstract

Gangguan kubikel di PLN UP3 Banjarmasin dikarenakan konstruksi pembangunan gardu kubikel kebanyakan sejajar dengan pemukaan tanah yang kurang sesuai untuk diterapkan di UP3 Banjarmasin, sehingga kelembaban pada kubikel cukup tinggi yang menyebabkan terjadinya korona. Korona adalah suatu kejadian yang terjadi saat udara di sekitar konduktor terionisasi dari proses tersebut terjadilah pelepasan muatan yang dapat mengakibatkan kegagalan isolasi pada udara. Penyebab yang lainnya adalah saat ini pada kubikel 20 kV tidak ada alat untuk mendeteksi suhu dan kelembaban sehingga apabila heater tidak bekerja secara maksimal atau rusak, maka kerusakan tidak bisa terdeteksi secara dini. Maka dibuatlah alat ini menggunakan NodeMCU dan sensor DHT22 untuk mendeteksi suhu dan kelembaban. Cara kerja alat ini adalah DHT22 sebagai sensor pendeteksi suhu dan kelembaban pada kompartemen kubikel outgoing yang dihubungkan dengan NodeMCU dan modem yang sudah diprogram untuk memonitoring secara realtime juga dapat memberikan notifikasi. Hasil dari penggunaan alat ini, bahwa kenaikan suhu dan kelembaban bisa terdeteksi dan data dapat ditampilkan secara realtime juga dapat memberikan notifikasi ketika suhu < 28̊ dan kelembaban > 60%. The cubicle disturbance at PLN UP3 Banjarmasin is due to the construction of cubicle substations being mostly parallel to the ground surface which is not suitable to be applied at UP3 Banjarmasin, so the humidity in the cubicle is quite high which causes corona. Corona is an event that occurs when the air around the conductor is ionized from the process there is a discharge of charge which can result in the failure of the insulation in the air. Another cause is that currently in the 20 kV cubicle there is no tool to detect temperature and humidity so that if the heater does not work optimally or is damaged, the damage cannot be detected early. So this tool is made using NodeMCU and DHT22 sensors to detect temperature and humidity. The way this tool works is the DHT22 as a temperature and humidity detection sensor in the outgoing which is connected to the NodeMCU and a modem that has been programmed for real can also provide notifications. The result of using this tool is that temperature and humidity increases can be detected and data can be displayed in real time and can also provide notifications when temperature is < 28̊ and humidity is > 60%.

Item Type: Thesis (Diploma)
Uncontrolled Keywords: NodeMCU, DHT22, Kubikel 20 kV)
Subjects: T Technology > TK Electrical engineering. Electronics Nuclear engineering
Depositing User: Ade Yulian
Date Deposited: 20 Aug 2022 03:34
Last Modified: 20 Aug 2022 03:34
URI: http://eprints.uniska-bjm.ac.id/id/eprint/12082

Actions (login required)

View Item View Item