ANALISIS KUAT TEKAN BETON MENGGUNAKAN LIMBAH CANGKANG KELAPA SAWIT DAN FLY ASH

Syafawi, Muhammad (2022) ANALISIS KUAT TEKAN BETON MENGGUNAKAN LIMBAH CANGKANG KELAPA SAWIT DAN FLY ASH. Diploma thesis, Universitas Islam Kalimantan MAB.

[img] Text
Lembar pengesahan skripsi.pdf

Download (148kB)
[img] Text
Lembar keaslian skripsi.pdf

Download (55kB)
[img] Text
Artikel Syafawi.pdf

Download (24kB)

Abstract

Beton merupakan bahan bangunan komposit yang terbuat dari kombinasi agregat dan pasta semen yang sudah sangat sering digunakan dalam sektor bangunan dan konstruksi di Indonesia. Seiring berjalannya waktu dengan meningkatnya jumlah penggunaan beton maka dapat menyebabkan jumlah sumber daya yang tersedia menurun, sehingga salah satu alternatif yang dapat digunakan untuk mengatasinya adalah dengan cara memanfaatkan hasil dari limbah-limbah industri sebagai pengganti bahan penyusun beton. Tujuan dari penelitian ini adalah untuk mengetahui komposisi serta hasil kuat tekan beton menggunakan bahan substitusi berupa cangkang kelapa sawit dan fly ash. Variasi persentase yang digunakan yaitu, 0%, 3%, 6%, 9% untuk cangkang kelapa sawit dan 5% untuk fly ash dalam setiap rencana campuran dengan mutu beton rencana sebesar K-200. Jumlah benda uji yaitu sebanyak 9 buah berbentuk kubus per variasi campuran dengan umur pengujian selama 7 hari, 14 hari dan 28 hari. Dari hasil penelitian didapati nilai kuat tekan beton dengan 0% CKS dan fly ash yaitu, sebesar 207,850 kg/cm2, CKS 3% dan fly ash 5% didapat sebesar 190,286 kg/cm2, CKS 6% dan fly ash 5% didapat sebesar 144,678 kg/cm2, dan beton dengan CKS 9% dan fly ash 5% didapat sebesar 122,011 kg/cm2. Kuat tekan beton menggunakan campuran CKS dan fly ash selalu mengalami penurunan serta hanya mampu mendekati untuk bisa mencapai mutu beton yang direncanakan. Concrete is a composite building material made from a combination of aggregate and cement paste which is very often used in the building and construction sector in Indonesia. As time goes by, with the increasing use of concrete, it can cause the amount of available resources to decrease, so that one alternative that can be used to overcome this is by utilizing the results of industrial wastes as a substitute for concrete constituents. The purpose of this study was to determine the composition and results of the compressive strength of concrete using substitution materials in the form of oil palm shells and fly ash. The percentage variations used are 0%, 3%, 6%, 9% for oil palm shells and 5% for fly ash in each mixed plan with a design concrete quality of K-200. The number of test objects is as many as 9 cube-shaped pieces per mixed variation with the age of testing for 7 days, 14 days and 28 days. From the results of the study, it was found that the compressive strength of concrete with 0% CKS and fly ash was 207.850 kg/cm2, CKS 3% and fly ash 5% was obtained at 190.286 kg/cm2, CKS 6% and fly ash 5% were obtained at 144,678 kg. /cm2, and concrete with 9% CKS and 5% fly ash obtained 122,011 kg/cm2. The compressive strength of concrete using a mixture of CKS and fly ash always decreases and is only able to approach the planned concrete quality.

Item Type: Thesis (Diploma)
Uncontrolled Keywords: Beton, Cangkang Kelapa Sawit, Fly Ash, Kuat Tekan Beton
Subjects: T Technology > TA Engineering (General). Civil engineering (General)
Depositing User: Muhammad Syafawi
Date Deposited: 28 Oct 2022 02:15
Last Modified: 28 Oct 2022 02:15
URI: http://eprints.uniska-bjm.ac.id/id/eprint/13046

Actions (login required)

View Item View Item