UJI KINERJA DAN TINGKAT AKURASI ALAT DEFIBRILATOR DENGAN MENGGUNAKAN DEFIBRILLATOR ANALYZER

Setyowati, Hutami (2019) UJI KINERJA DAN TINGKAT AKURASI ALAT DEFIBRILATOR DENGAN MENGGUNAKAN DEFIBRILLATOR ANALYZER. Diploma thesis, Universitas Islam Kalimantan MAB.

[img] Text
Jurnal HUTAMI skripsi 2019 sia.pdf

Download (205kB)

Abstract

ABSTRAK Defibrilator merupakan stimulator detak jantung yang menggunakan aliran listrik bertegangan tinggi untuk memulihkan pasien yang terkena serangan jantung dan alat ini termasuk alat dengan tingkat resiko tinggi karena dengan kesalahan pemberian dosis kelistrikan yang tidak sesuai akan berbahaya bagi pasien yang diberikan kejutan listrik jantung. Melalui uji kinerja dan tingkat akurasi alat defibrilator dengan menggunakan alat defibrillator analyzer dan electrical safety analyzer untuk mengetahui performa dari alat defibrilator. Oleh karena itu dalam penelitian ini telah dicoba dilakukan uji kinerja dan uji tingkat akurasi alat defibrilator dengan menggambil data yang berbeda-beda alat didapatkan uji kelistrikan pada alat defibrilator dengan hasil keseluruhan masih masuk dalam ambang batas dari standar yang ditetapkan yaitu Mains Voltage / Live – Neutral 220V± 10%Volt, Protective Earth Resistance ≤ 0,2 Ω, Insulation Resistance / Mains-PE ≥ 2 MΩ, Earth Leakage Current Normal Polarity Closed Neutral ≥ 500 A. Hasil dari keluaran energi (Joule) pada seluruh alat masih masuk dalam range ±15% dari setting keluaran energi (Joule) dan untuk waktu pengisian (Charge time) pada masing-masing alat defibrilator seluruhnya masih masuk dalam range standar 15 detik. Dengan hasil persentase tingkat keakurasian terbaik sebesar 100% dan tingkat akurasi terendah sebesar 99,84% dan 100,05% yang dikarenakan hasil output energy nilainya kurang atau lebih dari setting output energy yang diinginkan. Hasil waktu pengisian (Charge time) tercepat sebesar 2,73 detik dan waktu pengisian (Charge time) terlama sebesar 11,4 detik. Sehingga dari penelitian yang dilakukan ini secara keseluruhan tingkat kinerja dan akurasi alat defibrilator masih dalam kondisi yang baik dan prima untuk digunakan dalam pelayanan kesehatan. Kata kunci : uji kinerja, uji akurasi, defibrilator ABSTRACT Defibrillator is a heart rate stimulator that uses high voltage electricity to recover patients affected by a heart attack and this tool is a tool with a high level of risk because by mistake in giving inappropriate electrical doses it will be dangerous for patients given cardiac electric shock. Through a test of the performance and level of accuracy of a defibrillator using a defibrillator analyzer and electrical safety analyzer to determine the performance of a defibrillator. Therefore, in this study, a performance test was conducted and the accuracy of the defibrillator was tested by taking different data. We found that the electrical test on a defibrillator device with the overall results was still within the threshold of the standard set, Mains Voltage / Live – Neutral 220V± 10%Volt, Protective Earth Resistance ≤ 0,2 Ω, Insulation Resistance / Mains-PE ≥ 2 MΩ, Earth Leakage Current Normal Polarity Closed Neutral ≥ 500 A. The results of the energy output (Joule) in all devices are still in the range of ± 15% from the energy output setting (Joule) and for the charging time (Charge time) for each defibrillator device all are still in the standard range of 15 seconds. With the results of the percentage of the best accuracy level of 100% and the lowest level of accuracy of 99.84% and 100.05% which is due to the output energy value is less or more than the desired output energy output. The fastest charge time is 2.73 seconds and the longest charge time is 11.4 seconds. So from this research, the overall level of performance and accuracy of the defibrillator is still in good condition and prime for use in health services. Keywords: performance test, accuracy test, defibrillator

Item Type: Thesis (Diploma)
Uncontrolled Keywords: Kata kunci : uji kinerja, uji akurasi, defibrilator Keywords: performance test, accuracy test, defibrillator
Subjects: T Technology > TK Electrical engineering. Electronics Nuclear engineering
Divisions: Faculty of Engineering, Science and Mathematics > School of Electronics and Computer Science
Depositing User: Hutami Setyowati
Date Deposited: 03 Dec 2019 02:38
Last Modified: 03 Dec 2019 02:38
URI: http://eprints.uniska-bjm.ac.id/id/eprint/30

Actions (login required)

View Item View Item