RANCANG BANGUN TURBIN VORTEX DENGAN SUDU BERBENTUK FLAT DAN LENGKUNG UPAYA MENINGKATKAN EFISIENSI

PERDANA, AFRIANDI RONI YUSUF (2021) RANCANG BANGUN TURBIN VORTEX DENGAN SUDU BERBENTUK FLAT DAN LENGKUNG UPAYA MENINGKATKAN EFISIENSI. Diploma thesis, Universitas Islam Kalimantan MAB.

[img] Text
ARTIKEL SKRIPSI RONI.pdf

Download (528kB)

Abstract

Pengukuran debit terbesar dengan nilai 7,71 l/s diuji coba dengan bukaan katup gas pompa air. Dengan penambahan debit air akan menyebabkan putaran poros turbin semakin meningkat. Putaran turbin terbesar terjadi pada sudu flat dengan 133 rpm dengan bukaan katup gas pompa air 100% atau debit air 7,71 l/s. Dari hasil pengujian torsi yang dilakukan pada putaran 70 rpm torsi terkecil terdapat pada sudu lengkung dengan bukaan katup gas pompa air 50% dengan torsi 0,76 Nm sedangkan torsi terbesar terjadi pada sudu flat dengan bukaan gas pompa air 100% atau debit 7,71 l/s dengan besar torsi 1,97 Nm. Dari hasil pengujian torsi yang dilakukan pada putaran 60 rpm torsi terkecil terdapat pada sudu lengkung dengan bukaan katup gas pompa air 50% atau debit air 5,24 l/s dengan torsi 0,81 Nm sedangkan torsi terbesar terjadi pada sudu lengkung sirip dengan bukaan katup gas pompa air 100% atau debit air 7,71 l/s dengan besar torsi 2,00 Nm. Dari hasil pengujian torsi yang dilakukan pada putaran 50 rpm torsi terkecil terdapat pada sudu lurus dengan bukaan katup gas pompa air 50% atau debit air 5,24 l/s dengan torsi 0,73 Nm sedangkan torsi terbesar terjadi pada sudu lengkung sirip dengan bukaan katup gas pompa air 100% atau debit air 7,71 l/s dengan besar torsi 1,81 Nm. Pada pengujian putaran 70 rpm besar daya terbesar dihasilkan oleh sudu berbentuk lurus dengan nilai 14,4 Watt dengan debit 7,71 l/s. Pada lengkung sirip dengan debit 5,24 l/s terjadi penurunan dibandingkan dengan sudu berbentuk lengkung. Pada pengujian putaran 60 rpm besar daya terbesar dihasilkan oleh sudu berbentuk lengkung sirip dengan nilai 12,5 Watt dengan debit 7,71 l/s. Sedangkan lengkung dan flat berhimpitan didebit 7,71 l/s. Pada putaran 50 rpm daya turbin paling besar dicapai pada pengujian dengan menggunakan bentuk sudu flat pada debit 7,71 l/s yaitu 5,9 Watt, sedangkan pada lengkung sirip terjadi penurunan drastis dengan nilai tertinggi 7,7 Watt. Daya potensi terbesar sebesar 30,27 Watt dengan bukaan katup gas pompa 100% atau debit air 7,71 l/s. Lengkung yang dibuat tidak terlalu besar maka hasilnya tidak berbeda jauh dari sudu berbentuk flat bahkan saat pengujian pada rpm 70 flat menjadi yang tertinggi. Nilai torsi terbaik didapatkan pada pengujian dengan sudu lengkung sirip dengan nilai 2,00 Nm, nilai gaya pengereman berpengaruh kepada torsi yang dihasilkan. Daya terbaik dihasilkan dengan pengujian pada sudu flat dengan daya 14,4 Watt dan debit 7,71 l/s. The measurement of the largest discharge with a value of 7.71 l/s was tested with the water pump gas valve opening. With the addition of water discharge will cause the turbine shaft rotation to increase. The largest turbine rotation occurs at flat blades with 133 rpm with a 100% water pump gas valve opening or a water flow rate of 7.71 l/s. From the results of torsion testing carried out at 70 rpm, the smallest torque is found in the curved blade with 50% water pump gas valve opening with a torque of 0.76 Nm while the largest torque occurs in the flat blade with 100% water pump gas opening or 7.71 l discharge. / s with a large torque of 1.97 Nm. From the results of torsion testing carried out at 60 rpm, the smallest torque is found in the curved blade with a 50% water pump gas valve opening or water flow rate of 5.24 l/s with a torque of 0.81 Nm, while the largest torque occurs in the curved fin blade with valve opening. 100% water pump gas or 7.71 l/s water discharge with a torque of 2.00 Nm. From the results of torsion testing carried out at 50 rpm, the smallest torque is found in the straight blade with a 50% water pump gas valve opening or the water flow rate is 5.24 l/s with a torque of 0.73 Nm while the largest torque occurs in the curved fin blade with valve opening. 100% water pump gas or 7.71 l/s water discharge with a torque of 1.81 Nm. In the 70 rpm rotation test, the greatest power is produced by a straight blade with a value of 14.4 Watt with a flowrate of 7.71 l/s. In the curved fin with a discharge of 5.24 l/s there is a decrease compared to the curved blade. In the 60 rpm rotation test, the greatest power is produced by a curved fin blade with a value of 12.5 Watt with a flowrate of 7.71 l/s. Meanwhile, curves and flats coincide with a discharge of 7.71 l/s. At 50 rpm the maximum turbine power was achieved in the test using a flat blade at a flow rate of 7.71 l/s, which is 5.9 Watts, while in the fin curve there was a drastic decrease with the highest value of 7.7 Watts. The largest potential power is 30.27 Watt with a 100% gas pump valve opening or a water flow rate of 7.71 l/s. The curve that is made is not too big so the results are not much different from the flat blade even when testing at 70 rpm the flat is the highest. The best torque value is obtained in testing with a curved fin blade with a value of 2.00 Nm, the value of the braking force affects the torque produced. The best power is produced by testing on a flat blade with a power of 14.4 Watt and a discharge of 7.71 l/s.

Item Type: Thesis (Diploma)
Additional Information: -
Uncontrolled Keywords: Turbin Vortex, Sudu Berbentuk Flat dan Lengkung Vortex Turbine, Flat and Curved Blades
Subjects: Q Science > Q Science (General)
Depositing User: Afriandi Roni Yusuf Perdana
Date Deposited: 12 Aug 2021 04:27
Last Modified: 12 Aug 2021 04:27
URI: http://eprints.uniska-bjm.ac.id/id/eprint/5916

Actions (login required)

View Item View Item