ANALISIS DAYA DUKUNG PONDASI BORE PILE MENGGUNAKAN DATA SONDIR DAN SPT PADA PROYEK PEMBANGUNAN RESERVOIR SUNGAI LOBAN

Abdul, Rahman (2021) ANALISIS DAYA DUKUNG PONDASI BORE PILE MENGGUNAKAN DATA SONDIR DAN SPT PADA PROYEK PEMBANGUNAN RESERVOIR SUNGAI LOBAN. Diploma thesis, Universitas Islam Kalimantan MAB.

[img] Text
ARTIKEL oke - Copy.pdf

Download (623kB)

Abstract

Pondasi Bore Pile merupakan pondasi yang dibangun dengan cara mengebor tanah terlebih dahulu, kemudian diisi dengan tulangan dan dicor. Bore Pile dipakai pada tanah dasar yang kokoh mempunyai daya dukung yang besar terletak sangat dalam, yaitu kurang lebih 15 meter serta keadaan sekitar lokasi tanah bangunan yang sudah banyak berdiri bangunan-bangunan yang . Kelebihan Pondasi ini adalah pemasangan yang tidak menciptakan gangguan suara, kebisingan, maupun getaran karena prosesnya dilakukan secara manual dan tidak menggunakan mesin. Jadi, selama dalam proses pemasangan berlangsung, lingkungan yang berada di sekitar proyek tidak terganggu dan proses ini juga tidak beresiko terhadap bangunan yang berada di sekitar tempat tersebut. Pemilihan bentuk pondasi yang didasarkan pada daya dukung tanah, perlu diperhatikan beberapa hal, antara lain bila tanah keras terletak pada kedalaman hingga 10 meter atau lebih dari di bawah permukaan tanah, maka jenis pondasi yang pada umumnya dipakai adalah pondasi Bore Pile. Berdasarkan analisis pembebanan vertikal dapat diketahui nilai beban vertikal maksimum yang harus ditahan oleh pondasi. Selain itu dalam menganalisis faktor keamanan pondasi juga harus diketahui nilai kapasitas daya dukung tiang bor pondasi yang dijinkan. Analisis perhitungan kapasitas daya dukung pondasi yang menggunakan metode Aoki dan De Alencar, Mayerhoff, dan Resse&Wright dan data penyelidikan tanah diperoleh dari hasil pengujian Sondir dan SPT. Berdasarkan hasil analisis pembebanan vertikal pada rencana pembangunan Reservoir Kapasitas Sebesar 500 m3 dengan tinggi Max air 2 meter menggunakan program SAP 2000 V14 diperoleh nilai pada gaya vertikal maksimum sebesar 37,583 ton. Sedangkan hasil perhitungan analisis kapasitas daya dukung pondasi bore pile diperoleh nilai kapasitas daya dukung ultimit pondasi data sondir S-1 metode aoki dan de alencar sebesar 72,893 ton sedangkan metode meyerhoff sebesar 443,100 ton, data sondir S-2 sebesar 83,406 seadangkan metode meyerhof sebesar 461,264 ton dan data SPT (BH-1) sebesar 56,52 ton. Dari hasil analisis dapat diperoleh nilai faktor keamanan pondasi bore pile dari data sondir S-1 metode aoki dan de alencar sebesar 1,93 sedangkan metode meyerhof sebesar 11,7, data sondir S-2 metode aoki dan de alencar sebesar 2,219 seadangkan metode meyerhoff sebesar 12,27 dan data SPT (BH-1) metode Resse&Wright sebesar 1,503. Dari perbandingan faktor keamanan dari ketiga titik dan tiga metode di peroleh bahwa pondasi bore pile Sondir S-1,Sondir S-2 dan data N-SPT BH-1 metode Resse&Wright bagus dari segi faktor keamanan. Bore Pile foundation is a foundation that is built by drilling the soil first, then filled with reinforcement and casted. Bore Pile is used when a solid subgrade which has a large carrying capacity is located very deep, which is approximately 15 m and the situation around the building land has many buildings. The strength of this foundation is that the installation does not create noise, noise, or vibration because the process is done manually and does not use a machine. So, during the installation process, the environment around the project is not disturbed and this process also does not pose a risk to buildings located around the site. The selection of foundation forms based on the carrying capacity of the soil, needs to be considered several things, among others, if hard soil is located at a depth of up to 10 meters or more below the surface of the soil, the type of foundation that is generally used is the Bore Pile foundation. Based on the analysis of vertical loading, it can be seen the value of the maximum vertical load that must be withheld by the foundation. In addition, in analyzing the foundation's safety factor, it is also necessary to know the allowable carrying capacity of the foundation. Analysis of the carrying capacity of the foundation carrying capacity using the methods of Aoki and De Alencar, Mayerhof, and Resse & Wright and soil investigation data obtained from the Sondir and SPT test results. Based on the results of the analysis of the vertical loading in the planned Reservoir construction with a capacity of 500 m3 with a Max air height of 2 meters using the SAP 2000 V14 program, a maximum vertical force value of 37,583 tons is obtained. While the results of the calculation of the carrying capacity of the Bore Pile foundation, the ultimit carrying capacity of the S-1 foundation for the aoki and de alencar method is 72,893 tons while the meyerhoff method is 443,100 tons, the S-2 carrying capacity is 83,406 while the meyerhoff method is 461,264 tons and SPT data (BH-1) of 56.52 tons. From the analysis results can be obtained the value of the Bore Pile foundation safety factor from the S-1 sondir data of the Aoki and de alencar method of 1.93 while the meyerhoff method of 11.7, the S-2ond sondir data of the Aoki and de alencar method of 2.219 while the meyerhoff method amounted to 12.27 and the SPT (BH-1) Resse & Wright method amounted to 1.503. From the comparison of the safety factors of the three points and the three methods it was found that the foundation of Sondir S-1 Bore Pile, Sondir S-2 and N-SPT data BH-1 Resse&Wright method is good in terms of safety factors.

Item Type: Thesis (Diploma)
Uncontrolled Keywords: Kapasitas, Daya, Dukung, Pondasi, Bore, Pile, Faktor, Keamanan. Capacity, Power, Support, Foundation, Bore, Pile, Factor, Safety.
Subjects: T Technology > TA Engineering (General). Civil engineering (General)
Depositing User: Abdul Rahman
Date Deposited: 19 Aug 2021 02:18
Last Modified: 19 Aug 2021 02:18
URI: http://eprints.uniska-bjm.ac.id/id/eprint/6645

Actions (login required)

View Item View Item