ANALISIS PELEBURAN ALUMUNIUM MENGGUNAKAN TUNGKU TABUNG GAS LPG 12 KG BERBAHAN BAKAR OLI BEKAS

AGUSTRIANTO, RIZKY MAULANA (2021) ANALISIS PELEBURAN ALUMUNIUM MENGGUNAKAN TUNGKU TABUNG GAS LPG 12 KG BERBAHAN BAKAR OLI BEKAS. Diploma thesis, Universitas Islam Kalimantan MAB.

[img] Text
JURNAL RIZKY.pdf

Download (629kB)

Abstract

Oli bekas salah satu limbah cair yang dihasilkan oleh mesin industri maupun mesin kendaraan pribadi. alumunium bekas yang kurang termanfaatkan dengan baik serta biaya bahan bakar dan biaya pembuatan yang dikeluarkan untuk pembuatan tungku pelebur alumunium yang lumayan mahal padahal tungku bisa dibuat dari barang bekas dan bahan bakar oli bekas yang relatif mudah didapat yang mungkin menghasilkan performa peleburan yang baik dari tungku-tungku peleburan yang pernah di buat sebelumnya. Metode yang dilakukan adalah metode eksperimental, dengan memodifikasi tungku pelebur alumunium yang terbuat dari tabung gas LPG 12 kg dengan sistem aliran udara paksa menggunakan blower, Penelitian ini bertujuan untuk mengetahui waktu, konsumsi bahan bakar dan temperatur dalam meleburkan alumunium. Tungku yang dengan menggunakan bahan bakar oli bekas Kawasaki 10W – 40 mampu meleburkan 1,5 kg alumunium kusen bekas dengan rata-rata waktu peleburan 23 menit, oli bekas Honda 10W – 30 mampu meleburkan 1,5 kg alumunium kusen bekas dengan rata-rata waktu peleburan 27 menit, dan oli bekas Yamaha 20W – 40 mampu meleburkan 1,5 kg alumunium kusen bekas dengan rata-rata waktu peleburan 30 menit. Rata-rata konsumsi bahan bakar oli bekas Kawasaki 10W – 40 sebanyak 1,3 liter dan oli bekas Honda 10W – 30 sebanyak 1,5 liter sedangkan oli bekas Yamaha 20W – 40 sebanyak 1,9 liter .Rata-rata temperatur alumunium kusen bekas dengan bahan bakar oli bekas Kawasaki 10W – 40 adalah 672°C dan oli bekas Honda 10W – 30 adalah 682°C sedangkan Yamaha 20W – 40 adalah 689°C. Used oil is one of the liquid waste produced by industrial machines and private vehicle engines. used aluminum which is not well utilized as well as the fuel and manufacturing costs incurred for the manufacture of aluminum smelting furnaces which are quite expensive even though the furnace can be made from scrap and used fuel oil which is relatively easy to obtain which may result in good smelting performance from furnaces- smelting furnace that was made before. The method used is an experimental method, by modifying an aluminum smelting furnace made of 12 kg LPG gas cylinder with a forced air flow system using a blower. This study aims to determine the time, fuel consumption and temperature in melting aluminum. The furnace that uses used Kawasaki 10W - 40 fuel oil is able to melt 1.5 kg of used aluminum frames with an average melting time of 23 minutes, used Honda 10W - 30 oil is able to melt 1.5 kg of used aluminum frames with an average time smelting 27 minutes, and used Yamaha 20W - 40 oil is capable of melting 1.5 kg of used aluminum frames with an average melting time of 30 minutes. The average fuel consumption of used Kawasaki 10W - 40 oil is 1.3 liters and used Honda 10W - 30 oil is 1.5 liters, while used Yamaha 20W - 40 oil is 1.9 liters. The average temperature of used aluminum frames is 1.9 liters. fuel used Kawasaki 10W - 40 oil is 672 ° C and used Honda 10W - 30 oil is 682 ° C while Yamaha 20W - 40 is 689 ° C.

Item Type: Thesis (Diploma)
Uncontrolled Keywords: Alumunium, Oli Bekas, Tungku, Tabung Gas LPG 12 Kg. Aluminum, Used Oil, Furnace, 12 Kg LPG Gas Cylinder.
Subjects: T Technology > TA Engineering (General). Civil engineering (General)
Depositing User: Rizky Maulana Agus Trianto
Date Deposited: 07 Dec 2021 02:47
Last Modified: 07 Dec 2021 02:47
URI: http://eprints.uniska-bjm.ac.id/id/eprint/7338

Actions (login required)

View Item View Item