EVALUASI PONDASI STRAUSS PADA PEMBANGUNAN GARASI TPA TABAK KANILAN BUNTOK KALIMANTAN TENGAH

Miliyani, Miliyani (2022) EVALUASI PONDASI STRAUSS PADA PEMBANGUNAN GARASI TPA TABAK KANILAN BUNTOK KALIMANTAN TENGAH. Diploma thesis, Universitas Islam Kalimantan MAB.

[img] Text
Artikel Miliyani 17640008.pdf

Download (519kB)

Abstract

Pondasi strauss pile adalah pondasi dalam yang dibor dan dibuat dengan cara memberi sebuah lubang silinders hingga pada tanah keras atau kedalaman yang diinginkan yang mempunyai daya dukung yang cukup untuk memikul beban-beban dari struktur diatasnya dan sesudah itu diisi dengan adukan beton. Kelebihan pondasi ini adalah harga lebih terjangkau, pengerjaan singkat, hasil pondasi lebih kokoh dan pemasangan yang tidak menciptakan gangguan suara, kebisingan, maupun getaran karena prosesnya dilakukan secara manual dan tidak menggunakan mesin. Jadi, selama proses pemasangan berlangsung, lingkungan di sekitar proyek tidak terganggu dan proses ini juga tidak beresiko terhadap bangunan yang terletak di sekitar tempat tersebut. Pemilihan bentuk pondasi perlu diperhatikan, selain itu, kedalaman lubang sekitar 6 - 10 meter pondasi yang dipakai adalah pondasi strauss pile. Dalam menganalisis faktor keamanan pondasi juga harus diketahui nilai kapasitas daya dukung pondasi yang diijinkan. Analisis perhitungan kapasitas daya dukung pondasi menggunakan metode Aoki dan De Alencar, Mayerhof dan data penyelidikan tanah yang diperoleh dari hasil uji Sondir. Dari hasil perhitungan analisis kapasitas daya dukung pondasi strauss pile diperoleh nilai kapasitas daya dukung ultimit pondasi data sondir S-1 metode aoki dan de alencar sebesar 67,621 ton sedangkan metode meyerhof sebesar 243,03 ton, data sondir S-3 sebesar 75,69 seadangkan metode meyerhof sebesar 190,66 ton dan sondir S-4 sebesar 77,71 seadangkan metode meyerhof sebesar 218,544 ton. Dari hasil analisis tersebut dapat diperoleh nilai faktor keamanan pondasi strauss pile dari data sondir S-1 metode aoki dan de alencar sebesar 1,88 sedangkan metode meyerhof sebesar 6,76, data sondir S-3 metode aoki dan de alencar sebesar 2,10 seadangkan metode meyerhof sebesar 6,30 dan sondir S-4 metode aoki dan de alencar sebesar 2,16 sedangkan metode meyerhof sebesar 6,08. Dari kedua metode tersebut kita dapat melihat perbandingan faktor keamanan metode mayerhof lebih besar dari pada metode aoki dan de alencar dan dari perbandingan faktor keamanan dari ketiga titik dan dua metode di peroleh bahwa pondasi strauss pile Sondir S-1,Sondir S-3 dan Sondir S-4 bagus dari segi faktor keamanan. Strauss pile foundation is a deep foundation that is drilled and made by giving a cylindrical hole to the desired hard soil or depth which has sufficient bearing capacity to bear the loads of the structure above it and after that it is filled with concrete mix. The advantages of this foundation are that it is more affordable, the work is short, the results of the foundation are more solid and the installation does not create noise, noise, or vibration because the process is done manually and does not use machines. So, during the installation process, the environment around the project is not disturbed and this process is also not at risk to the buildings located around the place. The selection of the form of the foundation needs to be considered, in addition, the depth of the hole is about 6 - 10 meters, the foundation used is a strauss pile foundation. In analyzing the foundation safety factor, it is also necessary to know the allowable value of the bearing capacity of the foundation. Analysis of the calculation of the bearing capacity of the foundation using the Aoki and De Alencar, Mayerhof method and soil investigation data obtained from the Sondir test results. From the calculation results of the analysis of the carrying capacity of the strauss pile foundation, the value of the ultimate bearing capacity of the foundation data of Sondir S-1 method Aoki and de Alencar is 67.621 tons while the Meyerhof method is 243.03 tons, Sondir S-3 data is 75.69 while the method Meyerhof is 190.66 tons and sondir S-4 is 77.71 while the Meyerhof method is 218.544 tons. From the results of this analysis, it can be obtained that the value of the safety factor for the strauss pile foundation from the Sondir S-1 data for the Aoki and De Alencar methods is 1.88 while the Meyerhof method is 6.76, the Sondir S-3 data for the Aoki and De Alencar methods is 2.10 while Meyerhof method is 6.30 and sondir S-4 method is Aoki and de Alencar is 2.16, while the Meyerhof method is 6.08. From these two methods, we can see that the comparison of the safety factor of the Mayerhof method is greater than that of the Aoki and de Alencar methods and from the comparison of the safety factors of the three points and two methods, it is found that the strauss pile foundation of Sondir S-1, Sondir S-3 and Sondir S -4 good in terms of safety factor.

Item Type: Thesis (Diploma)
Uncontrolled Keywords: Daya dukung pondasi strauss pile bearing capacity of strauss pile foundation
Subjects: T Technology > TA Engineering (General). Civil engineering (General)
T Technology > TC Hydraulic engineering. Ocean engineering
T Technology > TD Environmental technology. Sanitary engineering
T Technology > TE Highway engineering. Roads and pavements
T Technology > TF Railroad engineering and operation
T Technology > TG Bridge engineering
T Technology > TH Building construction
Depositing User: Miliyani
Date Deposited: 25 Apr 2022 02:19
Last Modified: 25 Apr 2022 02:19
URI: http://eprints.uniska-bjm.ac.id/id/eprint/9366

Actions (login required)

View Item View Item